houseboat magazine
Your Ultimate Online Houseboating Resource
Welcome to Houseboat Magazine
Contact UsAdvertise

AFTERMARKET MANUFACTURERS BROKERS FORUMS
Administered by The Pirate
+ Reply to Thread
Results 1 to 5 of 5

Thread: Twin 225 outboards on a 35ft Burnscraft

  1. #1
    Junior Member
    Join Date
    Jun 2015
    Posts
    2

    Twin 225 outboards on a 35ft Burnscraft

    I have a 1971 35ft burnscraft. Twin 318s that are coming out, outdrives are rough and transom needs to be done. I found a pair of merc 225 outboards for a steal of a deal. I plan on glassing the transom and reinforcing it. Adding a bracket and these motors. Are they to big? Do you guys think it will work?

  2. #2
    Member boatlover's Avatar
    Join Date
    Sep 2012
    Location
    Beaver,Pa
    Posts
    76
    Yes it will work. There used to be a 38 Holiday Mansion with twin outboards here in Pgh,Pa.
    Last edited by boatlover; 06-04-2015 at 02:07 PM.
    1991 Pluckebaum 70'
    13' Boston Whaler, 40hp Yamaha
    10' AB rib, 25hp Suzuki (for sale)

  3. #3
    Super Moderator OLD HOUSEBOATER's Avatar
    Join Date
    Oct 2002
    Location
    Tavares Florida
    Posts
    1,909
    Depends on the gear ratios and size of the props on the outboards. If the out boards were set up for a lighter boat they will just spin out on the BC. If they were on a heavy boat with large diameter props your probably ok. The 318s were probably spinning 3 or 4 blade 20 inch with a 16 /18 pitch or bigger.

    I would rebuild the 318s.
    Last edited by OLD HOUSEBOATER; 06-03-2015 at 08:27 PM.
    The fries are cold so we gave you extra.

  4. #4
    Senior Member Stmbtwle's Avatar
    Join Date
    Apr 2003
    Location
    Ruskin, Florida
    Posts
    2,477
    Agree the size of the props is important. Depending on the boat the motors were on before, you'll probably need new props anyway. Get the biggest diameter that will fit those motors and a much lower pitch.

    How fast do you really feel you need to go? You could probably do quite nicely with ONE outboard, and sell the other or keep it for spares.
    She's a tired old barge but she's paid for!

  5. #5
    Senior Member Endurance's Avatar
    Join Date
    Nov 2005
    Location
    Lake Powell, Utah
    Posts
    270
    I think you'll do fine. My guess is that you will end up with props in the range of 13 pitch to 15 pitch. I had 9 pitch props when my boat had 50 hp outboards; I changed to 11 pitch when I replaced the 50 hp outboards with 115 hp outboards. My boat is 65' x 18' with aluminum pontoons. With 225s on a 35' boat, you won't be underpowered. I think I would err on the side of being slightly overpropped rather than being slightly underpropped to get good fuel economy out of the 225s.

    I bought Propco propellers and I'm glad I did. They sell a reverse hook cup propeller for houseboats. They claim that the reverse hook cup increases reverse thrust by 200% with no noticeable effect on forward thrust. I have gotten used to inflated marketing claims, but this one seems legit. My experience is that, if anything, the 200% reverse thrust figure is understated. That's huge for maneuvering around docks, especially in wind. I have no ties to Propco except that I own a pair of their props. I have found that they have things not listed on their website so I'd call them if they don't list reverse cup hook props for a 225.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts