houseboat magazine
Your Ultimate Online Houseboating Resource
Welcome to Houseboat Magazine
Contact UsAdvertise

AFTERMARKET MANUFACTURERS BROKERS FORUMS
Administered by The Pirate
+ Reply to Thread
Results 1 to 6 of 6

Thread: New flooring,

  1. #1
    Member
    Join Date
    Jul 2012
    Location
    Burkesville Ky
    Posts
    88

    New flooring,

    A new floor is planned, for the salon galley hall. Question is, does anyone have any first hand experience with nailed down hardwood flooring.

    We have used the floating sculptured vinyl like flooring, we have had linoleum/ vinyl, carpet, & cork.

    Now IM wondering about the non flex issue with nailed down, hope I can hear from those of you who have first hand experience, but as always can sort through the others (wink)

    This isnt a HB that stays on the dock we go out

  2. #2
    Senior Member 42gibson's Avatar
    Join Date
    Nov 2010
    Location
    norwich,ohio
    Posts
    327
    were putting self locking hardwood in our gibson when it warms up enough to do it. several boats near us have hardwood floors with no problems and we pull out every year. there is a 75 ft pluckebaum just up the river from us with nailed hardwood in the galley with no problems.
    Last edited by 42gibson; 03-03-2013 at 05:16 PM.
    44 gibson executive
    on the muskingum river & ohio river
    marietta,ohio

  3. #3
    Member boatlover's Avatar
    Join Date
    Sep 2012
    Location
    Beaver,Pa
    Posts
    46
    Don't worry abut a nailed down floor. Even if the floor is nailed down it still will move a little. About 8 years ago I installed a nailed down 3/4" thick solid Cherry floor in the upper salon of my old 57' Carlcraft. Approx 22' x 10'. I had no problems with it and it still looks very good with the new owner reporting no issues. Sorry I can't find a picture to post.

    I have been in the Pluckebaum that 42gibson mentioned and it is beautiful. Here is a picture of the floor in it.
    Last edited by boatlover; 03-03-2013 at 07:06 AM.
    1991 Pluckebaum 70'
    13' Boston Whaler, 40hp Yamaha
    10' AB rib, 25hp Suzuki (for sale)

  4. #4
    Member
    Join Date
    Jul 2012
    Location
    Burkesville Ky
    Posts
    88
    thanks this is a good start, thanks for the reply's, curious about the floor design ......How do they do that?

  5. #5
    Member boatlover's Avatar
    Join Date
    Sep 2012
    Location
    Beaver,Pa
    Posts
    46
    I believe that floor is a true inlay. lots of precisely cut pieces assembled like a puzzle. I have seen the same effect though not as nice achieved with stencils and careful staining. You could also paint a design on and seal it in with polyurethane.

    The woodwork on that Pluckebaum is Amazing. The boat is listed on Yachtword with different pic of the interior. Lots of beautiful walnut.

    http://www.yachtworld.com/boats/2002.../United-States
    1991 Pluckebaum 70'
    13' Boston Whaler, 40hp Yamaha
    10' AB rib, 25hp Suzuki (for sale)

  6. #6
    Senior Member 42gibson's Avatar
    Join Date
    Nov 2010
    Location
    norwich,ohio
    Posts
    327
    boatlover is right,that boat is beautiful.i think the best part is the rumbling from those cats when the boat comes by us even at a idle.
    44 gibson executive
    on the muskingum river & ohio river
    marietta,ohio

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts