houseboat magazine
Your Ultimate Online Houseboating Resource
Welcome to Houseboat Magazine
Contact UsAdvertise

AFTERMARKET MANUFACTURERS BROKERS FORUMS
Administered by The Pirate
Results 1 to 10 of 46

Thread: Toilet impeller replacement

Threaded View

  1. #35
    Senior Member Stmbtwle's Avatar
    Join Date
    Apr 2003
    Location
    Ruskin, Florida
    Posts
    2,351
    Vented loops are mainly there to prevent the boat from flooding if the toilet is located below the waterline, and the loop must be located above the highest waterline (important on a sailboat). If the toilet is already above the waterline you don't need one on the fill side (I don't). If the toilet is above the holding tank as well you may not need one on the discharge side either it but it probably helps keep odors under control. The height of the loop may affect the amount of water that remains in the bowl after flushing. Mine is only a few inches above the toilet discharge (still below the rim) and works just fine, thought I've considered raising it a couple inches. It's nearly a 3' drop to the holding tank.

    Note: my diaphragm pump is located below the waterline, so it always gets a prime.
    Last edited by Stmbtwle; 06-05-2013 at 08:08 AM.
    She's a tired old barge but she's paid for... http://s71.beta.photobucket.com/user...24993.pbw.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts