After attempting to repack the shaft pack nut, I discovered a bent shaft on my port engine.
It must have happened over a year ago when we ran a ground on Lake Texoma when lake was way down.
Port side prop was bent.
I had the marina pull the boat and fix/replace the props B.O.A.T. +,
I assumed the shaft was checked.
In hind sight I should have checked right after running a ground. newbe mistake.
Any way, having the boat pulled next month for a bottom job. Is pulling and replacing or repairing the shaft something I should do or have the marina do it?
Mike <BR>lake texoma, 1995 44 gibson standard