steveo12345
Junior Member
Posts: 3
Joined: 02/27/2008
My 83 Gibson Std has Crown heads. They both have a reservoir which
is supposed to contain tank treatment which siphons out and into
the bowl each time you flush. The reservoirs are there but the tube
is not connected on either one. What sort of fitting do you use to
tap into the water line and where would I find such an animal
Thanks in advance. Steve
There should be a small tube with a check valve at the end of it, leading to a small nozzle on the elbow at the rear of the toilet bowl. It doesn't tie into any sort of water line, just the siphon elbow at the rear of the toilet bowl. A small amount of the deodorant is drawn along with your incoming rinse water from outside the boat. It mixes with the incoming water, to pre-treat the water before it enters the toilet bowl. Then you refill the reservoir as necessary. You'll need Raritan part # CH336W (siphon assembly), and if the elbow at the rear of the toilet bowl doesn't have the referenced nozzle on it, you'll also need one of those, CH50CW (siphon elbow assembly).
stevo I just made a post about removing all this stuff mine worked fine, and looks good perhaps its something you can use, not interested in making any $ off it cover my time for shipping and pack and its yours if u need it I can send you pics,
give me a shout tipgun@hotmail, for those ready to remind me of the classifieds u can reach me at the above also.........trying to be helpful
Topic Tools
06/09/2008 10:22:38 AM
Thanks in advance. Steve
