View Full Version : purasan problem

03-15-2019, 07:58 AM
we have a purasan in our 1991 Gibson. it worked flawlessly then overnight it just quit.i changed the push button flush board and the main control board to no avail. it had electric going to it everywhere it should,no blown fuses .the head flushes if you hold the button down but the purasan wont come on. any ideas?

03-19-2019, 09:28 AM
What head are you using, Crown or Atlantes? I ask because the Atlantes has a single conductor (yellow on the diagram) that connects to a wire between the Purasan circuit board (S4) and the switch panel (S2). Maybe that wire has been broken or a switch problem on the head??

I have 2 Purisan units. Please share what you find.