Does anyone have any good tips for getting your houseboat out of hibernation? Any horror stories you want to share?
These questions come up every once in awhile: What brand do I have: Rounded upper with fin with hole DANA Rounded upper with a chunk no...
A large number of mid 60s to the mid 70's houseboats were equipped with DANA and CHRYSLER DRIVE 90 outdrives. Most installations utilized 225 HP 318...
Once in a while a request comes up for information on how to lubricate control cables. You need a foot and a half of 3/8 ID reinforced plastic...
sadly its the end of another great season. we spent 5 hours covering the boat yesterday and definitely feeling the effects of it. i'm to old for this...
we have a purasan in our 1991 Gibson. it worked flawlessly then overnight it just quit.i changed the push button flush board and the main control...
I understand the operation of this clutch, but I'm needing to know when the clutch is supposed to be engaged. Is it engaged whenever the boat is...
We may have a temporary solution in the form of a guy who builds fine fishing boats, but does a little maintenance on the side, but just curious: you...
Thinking about putting wood floors in my 75' Fantasy. Has anyone done this? Wondering if it would be best to use laminate, or solid; float the...
new houseboat to me , first time houseboat owner - early 2000s sunstar, raritan MSD type 1 , trying to find the right chlorine type chemical that is...
Hello. First post. I have a 1993 Sumerset that has a stairway going up from the front deck. Inside, there is a storage cabinet under those...
Which one is the correct switch to give power to this dc flojet pump. I have tried all the dc switches but cant seem to find power for it
I am thinking about using marine carpet on the top deck of my older houseboat. I have a large canvass canapy with side curtains. Any input on this...
help. I bought a 1978 Gibson houseboat and need to find an owners manual. Will pay for a copy.
any suggestions on how to treat a fiberglas hull bottom? Mine is black and scaly. Should I sand it and then paint it?
We finally got our mini split AC installed. It's a 120 volt system and is designed to be on a 15 amp breaker. Our dock has a 30 amp GFCI breaker and...
Ok so we are totally newbies and trying to bring our Holiday Mansion houseboat to a newer modern look without doing any damage to the boat. We would...
OK, I've had this boat for 25 years and now the transom is rotting out. It's a 1971 35' SilverQueen with the Chrysler 318 and Dana outdrive and...
I had ugly black stains on our composite deck and canvas from mold / mildew/ algae. I sprayed it down with some of that stuff they sell to remove...
Starting to look into replacing the batty charger in the engine compartment. We have a house bank, a starting battery, both on a switch. also a gen...
The sliding door on my Gibson finally wore out and I can't figure out how to get the door off to replace the rollers. if you have come across this...
I am working on installing a second AC unit in our 97 Gibson 41 Sport. It appears to all wired up and ready for one. But for some reason the factory...
How often do you pull your boat of out the water for maintenance - changing sacrificial anodes, gear oil, impellers, etc.?
Not afraid to appear dumb here, obviously lol. I have 2, 50 amp outlets at the pedestal. My boat has one receptacle for the power cord from the...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules