Once in a while a request comes up for information on how to lubricate control cables. You need a foot and a half of 3/8 ID reinforced plastic...
These questions come up every once in awhile: What brand do I have: Rounded upper with fin with hole DANA Rounded upper with a chunk no...
Does anyone have any good tips for getting your houseboat out of hibernation? Any horror stories you want to share?
A large number of mid 60s to the mid 70's houseboats were equipped with DANA and CHRYSLER DRIVE 90 outdrives. Most installations utilized 225 HP 318...
Which one is the correct switch to give power to this dc flojet pump. I have tried all the dc switches but cant seem to find power for it
My coolant tank for the gen is indicating I need to add coolant. The current coolant is the green colored type. Can I just buy the typical green...
I am new to 12V wiring and I am having trouble wiring up a dual trumpet Ongaro marine horn. Using my multi meter I am reading a solid 12V power...
The sliding door on my Gibson finally wore out and I can't figure out how to get the door off to replace the rollers. if you have come across this...
I have a 35ft burnscraft with 318s and some rough Dana outdrives. The transom is soft and needs redone. I found a great deal on a pair of 2 stroke...
I thought I would share the saga with my port engine: 1. Last weekend I decided to fire up the engines for the first time this year. 2. Starboard...
I thought I'd share this recent weird experience. Our last trip out in the houseboat was almost cut short by a generator that wouldn't run. Our...
As some of you have read by now, I am considering a used Pluckebaum houseboat. I know the structures are made well and of Aluminum. That being...
So I am going to replace my struts after this season. The one is really eaten away from the corrosion and the other isn't in that bad of shape but...
I've noticed that the number of roof coating threads here is not as strong as I would expect based on how often it seems to need done. I thought I...
On Barkley lake, in western Ky, we are having a problem with an algae growth on aluminum pontoons. What would be the best paint for this problem. Up...
I have a 1991 37 Widebody and would like a manual of a boat close to that.
So in this phase of my rehab, I need to get my rudders straightened or replaced. I have dismantled the shaft log for the rudders to almost nothing....
Ive tried searching but have not been able to figure out our issue. Boat is a 1990 model and had a 35amp charger on it. Worked great till the winter...
Starting to look into replacing the batty charger in the engine compartment. We have a house bank, a starting battery, both on a switch. also a gen...
Putting in new frig w/ice-maker. Advice for the installation on this water line kit. That thin white plastic tubing looks a little suspect. Those...
Our boat is in dire need of a new paint job. The fly bridge has returned to its rather ugly original colors and we now have one of the worst looking...
My wife and I looked at three boats this weekend. Each boat had something we liked and some things that we would change. The one boat we really...
Hello. I am new to the houseboat ownership ranks but not new to boating. I recently purchased a 34' Catamaran Cruiser houseboat. It is a fixer...
I discovered that our house batteries have lost some of their storage capacity on recent tie-outs away from dock. My rough estimate is that the...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules