Probably on the bulkhead wall in the bilge area.
|
||||||||||||
| ||||||||||||
![]() | ||||||||||||
![]() | ||||||||||||
![]() |
Probably on the bulkhead wall in the bilge area.
The fries are cold so we gave you extra.
Do you have any pics, Dockmaster?![]()
tons
do you have a generic set of instructions for posting images/jpeg or files
I have tried in past, but haven't had any luck
1 Go to advanced
2 scroll down to manage attachments
3 follow the directions
The fries are cold so we gave you extra.
Rod,
How do you reduce the image size so it fits?
Thanks, Jolly Time
Pirate on the Boatel have you ever experienced an water seepage or water in walls?
Anyway it;s really weird- I pulled the boat because I couldn't figure out where water was in coming from; appeared to be fresh water so I drain and disconnect all fresh water-clear bilge several times and every day come back to same amount Then I notice on port engine room wall where generator exhaust goes out it is building up with water-strange again-I vacumn out and come back it's full.
I decide to pull boat, as i trailer it out i notice water coming out of port rudder shaft, pretty fair amount which was strange since when i crawled back there behind the gas tank I see no water.
The hull appears undamaged and no holes. Does the bluewater have a hull over a hull so to speak so I am not seeing all the water or? Any ideas from anyone? How and where could the interior engine room wall be filling with water