houseboat magazine
Your Ultimate Online Houseboating Resource
Welcome to Houseboat Magazine
Contact UsAdvertise

AFTERMARKET MANUFACTURERS BROKERS FORUMS
+ Reply to Thread
Results 1 to 3 of 3

Thread: Chrysler Drive 90 (Dana) Clutch Question

  1. #1

    Chrysler Drive 90 (Dana) Clutch Question

    I understand the operation of this clutch, but I'm needing to know when the clutch is supposed to be engaged. Is it engaged whenever the boat is running but in neutral? Does in engage briefly when shifting from Neutral into FORWARD or REVERSE
    ?

    All of the wiring has been removed so I have nothing to go on. The solenoid is connected. The pump, linkage, clutch, etc... everything in the back of the boat is connected, but the wire that powers the solenoid terminates under the helm. The gear control seems to have a switch built into it with several taps, but I'm not sure what I should be hooking up.

    This is in a 1971 Gibson with a Chrysler LM318 engine

  2. #2
    Administrator Zilpo55's Avatar
    Join Date
    Mar 2007
    Location
    Lake Cumberland, KY
    Posts
    167
    I've always been a Mercruiser guy, so I don't have any answers. I just wanted to welcome you to the forum. Keep checking back, because there are longtime boaters on here that don't check in very often.

  3. #3
    Junior Member
    Join Date
    Jul 2012
    Posts
    3
    My understanding is when shifting from Neutral into FORWARD or REVERSE

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts